Sure Drive USA has launched a new composite fascia board screw that installs without the need for an expensive countersink bit. The Sure Hold fascia board screw has been designed with wings that auger through fascia and trim board creating an oversized hole. The oversized pilot hole allows for the expansion and contraction movement and keeps fascia board panels straight. No pre-drilling is required to install this superior engineered fastener. The Sure Hold fascia board screw has a self-starting Type-17 auger tip that eliminates splitting and starts faster. Made from strong 410 grade coated stainless steel, these screws will hold up to a variety of extreme weather conditions.
The oversized flat top head design covers the oversized pilot hole while giving a modern finish with its raised head. A variety of colors are available to match your composite fascia project: Mahogany, Earthtone, Graystone, Ipe and White. For an easy one step application try the Sure Hold fascia board screw today. They are available packaged in a 100-piece resealable clear clam shell package and a free T-20 star drive bit is included for your convenience. The recommended installation spacing is to install a minimum of two screws vertically at the end of the board then alternate in a zig zag pattern and install a screw every twelve inches, then finish with two screws at the end of the board.
You can request a free sample or contact Sure Drive USA to find a dealer near you. Email us at email@example.com or call us at 800-951-2222. (paid placement)